background image

7

18V LI-ION IMPACT DRILL 

EN

18.  Do not recharge non-rechargeable batteries, as 

they can overheat and break.

19. Longer life and better performance can be 

obtained if the battery pack is charged when the 

air temperature is between 18

o

C and 24

o

C. Do not 

charge the battery pack in air temperatures below 

4.5

o

C, or above 40.5

o

C. This is important as it can 

prevent serious damage to the battery pack.

20.  Charge only battery pack of the same model 

provided by ROCKWELL and of models 

recommended by ROCKWELL

SAFETY WARNINGS FOR BATTERY PACK 

a)  Do not dismantle, open or shred cells or battery 

pack. 

b)  Do not short-circuit a battery pack. Do not store 

battery packs haphazardly in a box or drawer 

where they may short-circuit each other or be 

short-circuited by conductive materials. 

When 

battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, 

screws or other small metal objects, that can 

make a connection from one terminal to another. 

Shorting the battery terminals together may cause 

burns or a fire.

c)  Do not expose battery pack to heat or fire. Avoid 

storage in direct sunlight.

d)  Do not subject battery pack to mechanical shock.

e)  In the event of battery leaking, do not allow the 

liquid to come into contact with the skin or eyes. 

If contact has been made, wash the affected area 

with copious amounts of water and seek medical 

advice.

f)  Seek medical advice immediately if a cell or 

battery pack has been swallowed.

g)  Keep battery pack clean and dry.

h)  Wipe the battery pack terminals with a clean dry 

cloth if they become dirty.

i)  Battery pack needs to be charged before use. 

Always refer to this instruction and use the 

correct charging procedure.

j)  Do not maintain battery pack on charge when not 

in use.

k)  After extended periods of storage, it may 

be necessary to charge and discharge the 

battery pack several times to obtain maximum 

performance.

l)  Battery pack gives its best performance when it 

is operated at normal room temperature (20 °C ± 

5 °C).

m)  When disposing of battery packs, keep battery 

packs of different electrochemical systems 

separate from each other.

n)  Recharge only with the charger specified by 

ROCKWELL. Do not use any charger other than 

that specifically provided for use with the 

equipment.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used 

with another battery pack. 

o)  Do not use any battery pack which is not 

designed for use with the equipment.

p)  Keep battery pack out of the reach of children.

q)  Retain the original product literature for future 

reference.

r)  Remove the battery from the equipment when 

not in use.

s)  Dispose of properly.

Summary of Contents for RD2874













Reviews: