Multi-PurPose saw
eNG
11
MaiNteNaNce
your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage your
power tool.
trouBlesHootiNG
symptom
Possible causes
Possible solution
The tool suddenly
stops during
operation.
Over load
battery temperature too high
Low battery capacity
Relieve the load on the machine immediately and allow
cooling for approx. 30 seconds at the highest no-load speed.
Charge the battery pack.