8
MicroLogix 1200 Programmable Controllers
Publication 1762-IN006C-EN-P - September 2009
Hazardous Location Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or non-hazardous
locations only. The following WARNING statement applies to use in hazardous locations.
Use only the following communication cables in Class I, Division 2 hazardous locations.
Catalog Number
Description
Input Power
Inputs
Outputs
1762-L24AWA, -L24AWAR
120/240V ac
(14) 120V ac
(10) relay
1762-L24BWA, -L24BWAR
120/240V ac
(10) 24V dc
(4) fast 24V dc
(10) relay
1762-L24BXB, -L24BXBR
24V dc
(10) 24V dc
(4) fast 24V dc
(5) relay, (4) 24V dc FET
(1) high-speed 24V dc FET
1762-L40AWA, -L40AWAR
120/240V ac
(24) 120V ac
(16) relay
1762-L40BWA, -L40BWAR
120/240V ac
(20) 24V dc
(4) fast 24V dc
(16) relay
1762-L40BXB, -L40BXBR
24V dc
(20) 24V dc
(4) fast 24V dc
(8) relay, (7) 24V dc FET
(1) high-speed 24V dc FET
WARNING
EXPLOSION HAZARD
x
Substitution of components may impair suitability for Class
I, Division 2.
x
Do not replace components or disconnect equipment
unless power has been switched off.
x
Do not connect or disconnect components unless power
has been switched off.
x
This product must be installed in an enclosure. All cables
connected to the product must remain in the enclosure or
be protected by conduit or other means.
x
All wiring must comply with N.E.C. article 501-4(b).
Summary of Contents for micrologix 1200
Page 2: ......
Page 28: ...28 MicroLogix 1200 Programmable Controllers Publication 1762 IN006C EN P September 2009 Notes ...
Page 36: ......
