18
Rockwell Automation Publication 6200-UM001C-EN-P - July 2018
Chapter 3
Install the Thin Client or Computer
Installation Precautions
Read and follow these precautions before you install your VersaView thin client
or industrial computer.
Environment and Enclosure Information
European Union Directive
VersaView 5000 ThinManager thin client and industrial computers meet the
European Union Directive requirements when installed within the European
Union or EEA regions and have the CE marking. A copy of the declaration of
the conformity is available at
https://www.rockwellautomation.com/global/
support/technical-documentation/overview.page
.
ATTENTION:
This equipment is intended for use in a Pollution Degree 2
industrial environment, in overvoltage Category II applications (as defined in
IEC 60664-1), at altitudes up to 2000 m (6561 ft) without derating.
This equipment is UL Listed, and considered Group 1, Class A industrial
equipment according to IEC/CISPR 32. Without appropriate precautions, there
can be potential difficulties with electromagnetic compatibility in other
environments due to conducted as well as radiated disturbance.
All VersaView integrated display thin clients and industrial computers are
shipped with a gasketed bezel to meet specified NEMA, UL Type, and IEC IP
ratings only when mounted in a panel or enclosure with an equivalent rating.
In addition to this publication, see the following:
• Industrial Automation Wiring and Grounding Guidelines, publication
, for more installation requirements
• NEMA 250 and IEC 60529, as applicable, for explanations of the degrees of
protection provided by enclosures
ATTENTION:
This equipment is intended to operate in an industrial or
control room environment, which uses some form of power isolation from
the public low-voltage mains.
To comply with EN 55024 and EN 55032, all cables, with the exception of the
Ethernet cables, must be used indoors. These cables cannot exit the building at
any point and cannot directly connect to cables outside the building. All I/O
cables, with the exception of the Ethernet cables and serial port (COM) cables,
must be less than 3 m (9.842 ft).
