Rockwell Automation Allen-Bradley Ultra3000, Manual

Page: 7 / 80

Rockwell Automation Publication 2198-RM006A-EN-P - December 2020 7
Preface
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at rok.auto/literature .
Resource Description
Kinetix Rotary Motion Specifications Technical Data, publication KNX-TD001
Product specifications for Kinetix VPL, VPC, VPF, VPH, and VPS; Kinetix MPL, MPM,
MPF, and MPS; Kinetix TLY and TL; and Kinetix HPK rotary motors.
Kinetix Linear Motion Specifications Technical Data, publication KNX-TD002
Product specifications for Kinetix MPAS and MPMA linear stages, Kinetix MPAR and
MPAI electric cylinders, and LDC-Series™ and LDL-Series™ linear motors
Kinetix Servo Drives Specifications Technical Data, publication KNX-TD003
Product specifications for Kinetix Integrated Motion over the EtherNet/IP network,
Integrated Motion over Sercos interface, EtherNet/IP networking, and component
servo drive families.
Kinetix Motion Accessories Specifications Technical Data, publication KNX-TD004
Product specifications for Bulletin 2090 motor and interface cables, low-profile
connector kits, drive power components, and other servo drive accessory items
Integrated Motion on Sercos and EtherNet/IP Network – Analysis and Comparison,
publication MOTION-AT006
Compares the similarities and differences between systems that use Serial Real-time
Communication System (Sercos) interfaces and systems that use EtherNet/IP
networks.
Motor Nameplate Datasheet Entry for Custom Motor Applications,
publication 2198-AT002
Provides an in-depth discussion on the use of nameplate data entry for custom
induction motors and permanent-magnet motors.
System Design for Control of Electrical Noise Reference Manual,
publication GMC-RM001
Information, examples, and techniques designed to minimize system failures caused
by electrical noise.
Servo Drive Installation Best Practice Application Technique,
publication MOTION-AT004
Best practice examples to help reduce the number of potential noise or
electromagnetic interference (EMI) sources in your system and to make sure that the
noise sensitive components are not affected by the remaining noise.
Kinetix 5300 Single-axis EtherNet/IP Servo Drives User Manual,
publication 2198-UM005
Provides installation instructions to mount, wire, and troubleshoot your Kinetix 5300
drive; and system integration for your drive/motor combination with a Logix 5000
controller (version 33.00 or later).
Kinetix 5300 Drive Systems Design Guide, publication KNX-RM012
System design guide to select the required (drive specific) drive module, power
accessory, feedback connector kit, and motor cable catalog numbers for your Kinetix
5300 drive and Kinetix motion control system.
AC Line Filter Installation Instructions, publication 2198-IN003
Provides information on how to install AC line filters designed for Kinetix 5300,
Kinetix 5500, and Kinetix 5700 servo drive systems
Shunt Resistor Installation Instructions, publication 2097-IN002 Provides information on how to install and wire Bulletin 2097 shunt resistors.
Kinetix Motion Control Selection Guide, publication KNX-SG001
Overview of Kinetix servo drives, motors, actuators, and motion accessories that are
designed to help make initial decisions for the motion control products best suited
for your system requirements.
Ultra3000 Drive Systems Design Guide, publication KNX-RM008 Reference material used to design an Ultra3000 servo drive system.
Ultra3000 Digital Servo Drives Installation Manual, publication 2098-IN003 Mounting, wiring, and connecting procedures for the Ultra3000 Digital Servo Drive.
Ultra3000 Servo Drives Integration Manual, publication 2098-IN005
Power-up procedures, system integration, and troubleshooting tables for the
Ultra3000 digital servo drive.
Kinetix 5300 Servo Drives Installation Instructions, publication 2198-IN021 Information mount and wire the Kinetix 5300 servo drive.
Kinetix 5300 Feedback Connector Kit Installation Instructions,
publication 2198-IN023
Information to install and wire the Kinetix 5300 motor feedback connector kit.
EtherNet/IP Network Devices User Manual, ENET-UM006
Describes how to configure and use EtherNet/IP devices to communicate on the
EtherNet/IP network.
Ethernet Reference Manual, ENET-RM002
Describes basic Ethernet concepts, infrastructure components, and infrastructure
features.
System Security Design Guidelines Reference Manual, SECURE-RM001
Provides guidance on how to conduct security assessments, implement Rockwell
Automation products in a secure system, harden the control system, manage user
access, and dispose of equipment.
Industrial Components Preventive Maintenance, Enclosures, and Contact Ratings
Specifications, publication IC-TD002
Provides a quick reference tool for Allen-Bradley® industrial automation controls and
assemblies.
Safety Guidelines for the Application, Installation, and Maintenance of Solid-state
Control, publication SGI-1.1
Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides
general guidelines for the application, installation, and maintenance of solid-state
control in the form of individual devices or packaged assemblies incorporating solid-
state components.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation® industrial system.
Product Certifications website, rok.auto/certifications . Provides declarations of conformity, certificates, and other certification details.