Rockwell Automation Allen-Bradley PowerFlex 700AFE, User Manual

Page: 66 / 186

66 Rockwell Automation Publication 20Y-UM001F-EN-P - April 2017
Chapter 2 AFE in IP21 Rittal Enclosure – Installation/Wiring
Power Terminals for AFE in IP21 Rittal Enclosure
Figure 34 and Figure 35 show the power terminal locations and specifications
for AFE Frames 10 and 13 in an IP21 Rittal enclosure.
Figure 34 - AFE Frame 10 Power Terminal Locations in IP21 Rittal Enclosure
Table 12 - AFE Frame 10 Power Terminal Specifications in IP21 Rittal Enclosure
1
2
3
3
(Shown with
enclosure doors
removed)
Front View Right Side View
Item Name Frame Description Wire Size Range
(1) (2)
Torque Terminal Bolt
Size
(3) (4)
Max Min Recommended
1 Input power terminals
L1, L2, L3
(1)
10 Input power 300 mm
2
(600 MCM)
2.1 mm
2
(14 AWG)
40 N•m
(354 lb•in) M10
2 SHLD terminal, PE,
ground
(3)
10 Terminating point for wiring shields 300 mm
2
(600 MCM)
2.1 mm
2
(14 AWG)
40 N•m
(354 lb•in) M10
3 DC bus
(3)
(DC–, DC+) 10 DC output 300 mm
2
(600 MCM)
2.1 mm
2
(14 AWG)
70 N•m
(620 lb•in) M12
(1) Maximum/minimum sizes that the terminals accept. These sizes are not recommendations.
(2) Do
not exceed maximum wire size. Parallel connections can be required.
(3) These connections are bus bar type terminations and require the use of lug type connectors.
(4) Apply counter-torque to the nut on the other side of terminations when tightening or loosening the terminal bolt to avoid damage to the terminal.