Rockwell Automation Allen-Bradley PowerFlex 700AFE, User Manual

Page: 34 / 186

34 Rockwell Automation Publication 20Y-UM001F-EN-P - April 2017
Chapter 1 AFE in IP20 2500 MCC Style Enclosure – Installation/Wiring
Power Terminals for AFE in IP20 2500 MCC Style Enclosure
Figure 16 and Figure 17 show the power terminal locations and specifications
for AFE Frames 10 and 13 in an IP20 2500 MCC Style enclosure.
Figure 16 - AFE Frame 10 Power Terminal Locations in IP20 2500 MCC Style Enclosure
Table 2 - AFE Frame 10 Power Terminal Specifications in IP20 2500 MCC Style Enclosure
1
2
4
4
4
3
2
Shown with
enclosure doors
and side removed.
Front View Right Side View
Item Name Frame Description
Wire Size Range
(1) (2)
Torque
Terminal Bolt
Size
(3) (4)
Max Min Recommended
1 Input power terminals
L1, L2, L3
(1)
10 Input power 240 mm
2
(500 MCM)
95 mm
2
(3/O AWG)
40 N•m
(354 lb•in) N/A
2 SHLD terminal, line PE,
ground
(3)
10 Terminating point for wiring shields
300 mm
2
(600 MCM)
2.1 mm
2
(14 AWG)
40 N•m
(354 lb•in)
M5-M10
3 SHLD terminal, motor
PE, ground
(3)
4 DC bus
(3)
(DC–, DC+) 10 DC output (using cable) 240 mm
2
(500 MCM)
2.1 mm
2
(14 AWG)
70 N•m
(620 lb•in) M12
DC output (using splice kit
SK-Y1-BUSSPLICE-F10) — — 40 N•m
(354 lb•in) M10
(1) Maximum/minimum sizes that the terminals can accept. These sizes are not recommendations.
(2) Do
not exceed maximum wire size. Parallel connections can be required.
(3) These connections are bus bar type terminations and require the use of lug type connectors.
(4) Apply counter-torque to the nut on the other side of terminations when tightening or loosening the terminal bolt to avoid damage to the terminal.