8
Calibrating the ClearMark Printer
Note: Affects all Cards
1. To open ClearTools, Go to
Start→Programs→Rockwell Automation→
ClearTools→ClearTools.
2. Double click on
"1492-M5X5"
in the variant list.
3. In the first column, 5 marker tags down, place a capital "X" as shown.
See Figure 10. Note: It is critical to select this tag.
Figure 10 -
4. On the display on the top of the printer, press the “
Heating 1
and
Heating 2
” buttons so that the LED lights are off.
a. The printed card can be cleaned with water and used again.
b. The distances required for calibrating the printer are not distorted by
the heat effects.
5. Select
File→Print
.
3
