14
Rockwell Automation Publication 1609-UM009D-EN-P - February 2021
1609-B Installation Instructions
Connect Power and
Equipment to the UPS
1.
Connect the appropriate input power to the UPS input (Line, Neutral,
and Ground) terminals.
2.
Connect the specified equipment to the UPS output (Line, Neutral, and
Ground) terminals.
Figure 6 - System Wiring
Figure 7 - 1609-B Block
WARNING:
This UPS features Surge Protective Device (SPD) located on the top
of the unit. Disconnect all power sources before servicing due to Electric Shock
Hazard for risk of severe injury or death.
INPUT
L
L
N
N
G
G
OUTPUT
AC Output
AC Input
L
E
N
L
E
AC
Input
AC
Output
Backfeed
Relay
Inverter
Relay
+
-
AC to DC (Charger)
DC to DC
DC to AC (Step Wave)
Backfeed
Relay
Input
Filter
N