10
Rockwell Automation Publication 1609-UM009D-EN-P - February 2021
Bulletin 1609-D Installation Instructions
Connect Power and
Equipment to the UPS
1.
Connect the appropriate input power to the UPS input (Line, Neutral,
and Ground) terminals.
2.
Connect the specified equipment to the UPS output (Line, Neutral, and
Ground) terminals.
Figure 2 - System Wiring
3.
Connect any additional optional accessories (Catalog Number: 1609-
ENET card).
Figure 3 - 1609-D Block
WARNING:
This UPS features Surge Protection Device (SPD) is located
on the left front of the unit. Disconnect all power sources before servicing
due to Electric Shock Hazard for risk of severe injury or death.
L
E
N
L
E
AC
Input
AC
Output
Backfeed
Relay
Inverter
Relay
+
-
AVR
AC to AC
AC to DC
DC to DC DC to AC
Backfeed
Relay
Input
Filter
Breaker
N
