150
Rockwell Automation Publication 450L-UM001F-EN-P - March 2022
Chapter 9 Connected Components Workbench Software
Figure 145 - Object Height Example – Object Size = 2, Object Tolerance = -1
Reduced Resolution
Blanking
Reduced resolution is similar to floating blanking with this exception: The
object does not need to be in the reduced resolution zone. Reduced resolution
blanking is not monitored blanking.
Settings
shows the setting for reduced resolution blanking.
describes the settings.
Table 67 - Object Height Formulas
Resolution
Max/Min
Formula
Finger (14 mm
[0.55 in.])
Min
Min object height is > (Object Size + Object Size Tolerance) x 9.42 + 3.91
Example with Object Size = 2 and Tolerance = -1
>(2 -1) x 9.42 + 3.91
>13.33 mm (0.52 in.)
Max
Max object height is < Object Size x 9.38 - 3.91
Example with Object Size = 2
<2 x 9.38 - 3.91
<14.85 mm (0.58 in.)
Hand (30 mm
[1.18 in.])
Min
Min object height is > (Object Size + Object Size Tolerance) x 18.84 + 5.70
Example with Object Size = 2 and Tolerance = -1
>(2-1) x 18.84 + 5.70
>24.54 mm (0.97 in.)
Max
Max object height is < Object Size x 18.76 - 5.70
Example with Object Size = 2
<2 x 18.76 - 5.70
<31.82 mm (1.25 in.)
3.91 (0.15)
13.33 (0.52)
9.42 (0.37)
9.42 (0.37)
3.91 (0.15)
14.85 (0.58)
9.38 (0.37)
9.38 (0.37)
5.70 (0.22)
18.76 (0.74)
18.76 (0.74)
31.82 (1.25)
5.70 (0.22)
18.84 (0.74)
18.84 (0.74)
24.54 (0.97)
Minimum Height (mm [in.])
Maximum Height (mm [in.])
Finger Resolution
(14 mm [0.55 in.])
Hand Resolution
(30 mm [1.18 in.])
