118
Rockwell Automation Publication 450L-UM001F-EN-P - March 2022
Chapter 9 Connected Components Workbench Software
Figure 96 - Add to Project
shows the Bulletin 450L safety light curtain device in the
Project Organizer.
The project name appears in the title of the window and in the Project
Organizer. In this example, the safety light curtain project name is “My
450L Project.”
The Bulletin 450L device appears in the Project Organizer with the
default name “450L_1.” If desired, the name of the safety controller can be
changed. Click the name to change the name of the safety light curtain
(or right-click and select Rename). This step is not required to complete
the configuration or to run the Bulletin 450L. The name that you choose
must follow these rules:
• No special characters, except underscore
• No double underscore
• 1…32 characters
An asterisk appears after the controller name and project name to
indicate that a valid project has not yet been saved.
12. In the Project Organizer, double-click the device name or icon to open
the product configuration tab.
Figure 97 - Project Created
Workbench Layout
shows the six major sections of the workbench layout.
•
Project Organizer – shows all devices that are contained in the project.
•
Header – shows the device identity and the connection information.
•
Toolbar – shows the operations/commands for the Bulletin 450L device.
The set of operations for Bulletin 450L-B and Bulletin 450L-E (DIP switch
