Rockwell Automation 6181P User Manual Download

Page: 99 / 124

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014

Chapter

Maintenance

Chapter Objectives

This chapter provides information on how to

Clean the Computer

Clean the Computer

It is important to maintain your computer by cleaning the display, heat sink and
vent holes, and removing grease or paint.

Clean the Integrated Display

Perform the following steps to clean the display.

Disconnect power from the computer at the power source.

Clean the display with a mild soap by using a clean sponge or a soft cloth.

Dry the display with a chamois or moist cellulose sponge to avoid water spots.

IMPORTANT

6181P computer bezels resist the following chemicals:

•

Alcohol (methyl or ethyl)

•

Cleaning naphtha

•

Commercial glass cleaners

•

Ammonia (10% dilute solution)

•

Oil (hydraulic or motor)

•

Diesel fuel

•

Gasoline (leaded or unleaded)

•

Antifreeze mixtures (such as ethylene glycol)

•

Automatic transmission fluid

ATTENTION:

If the computer has a touchscreen, it is possible for screen

objects to activate during equipment wash-downs if the computer is
turned on.

ATTENTION:

Use of abrasive cleansers or solvents can damage the

display window. Do not scrub or use brushes.

Summary of Contents for 6181P





























































































































Search results

Summary of Contents for 6181P

Reviews:

Related manuals for 6181P

Brands by name

Popular brands

Rockwell Automation 6181P, User Manual

Search results

Summary of Contents for 6181P

Reviews:

Related manuals for 6181P

Brands by name

Popular brands