Publication 440R-RN001A-EN-P - April 2009
2
Guardmaster MSR57P Speed Monitoring Safety Relay
Download the Firmware Update File
Follow these steps to obtain the firmware upgrade file.
1.
Go to
www.rockwellautomation.com/support/firmware.html
and choose Minotaur Safety Relays.
2.
Click the file named MSR57_1_005_Update.msi.
3.
Save the file to your hard drive.
Save Your MSR57P Configuration to Your PC
1.
Launch DriveExplorer software and connect to the relay.
2.
In the tree view, expand the MSR57P relay.
3.
Expand the Parameter groups and select the Security group.
4.
Place the relay in Run mode by setting the P6 [Operating Mode]
parameter to 1.
5.
Record the value of the P10 [Signature ID] parameter.
You will need to verify this value is unchanged after you reload
your configuration following the update.
6.
From the Actions menu, choose Upload and Save to save your
configuration.
7.
Browse to the directory where you want to save your file.
8.
Name the file and click Save.
This is the current configuration of the MSR57P relay. Once the
firmware update is complete, you can download this
configuration back into the relay.
IMPORTANT
The Firmware update process deletes the configuration and restores
the default parameters. If you save your configuration to your PC, you
can reload it following the update.
