Rockwell Automation 2711C-F2M, Quick Start Manual

Page: 87 / 110

87 Publication 2711C-QS001F-EN-P - November 2010 87
Chapter
8
Create Alarms
Introduction
In this chapter, you will create alarms that will be triggered when the motor speed is at its ideal operating
speed or near its upper threshold.
Before You Begin
• Review the sample application.
• Connect your terminal to your computer and launch the PanelView Explorer software.
• Configure browser settings.
• Open a new application.
• Configure runtime communication settings for the application.
• Create tags for the application.
• Create the Motor Status screen.
• Create the Motor Speed screen.
What You Need
• Motor_speed tag defined in the Tags view. This tag will be the trigger for two alarms.
Topic Page
Review Application Alarms 88
Open the Alarms View 89
Create Alarms 89