Installation Instructions
Original Instructions
GuardLogix 5580 Controllers
The GuardLogix® 5580 controllers help enable faster system performance, capacity, productivity, and security to help meet the growing demands of smart machines and
equipment for manufacturing.
•
Integrated Motion over EtherNet/IP
TM
for up to 256 axes.
•
1 Gb embedded Ethernet port enables high performance, communications, I/O, and motion control.
•
Secure Digital (SD) card provides optional nonvolatile memory to store user program and tag data on the controller.
•
Studio 5000 Automation Engineering & Design Environment® provides ease of system design and commissioning.
•
Digitally signed and encrypted firmware helps protect against malicious intent.
•
FactoryTalk® Security provides centralized authentication and access control by verifying the identity of each user-access attempt to the system.
•
Display provides enhanced diagnostics and troubleshooting.
The GuardLogix controller is made up of a primary controller and a safety partner, for SIL 3 applications, that function together in a 1oo2 architecture. With a safety partner
installed, GuardLogix controllers are:
•
Type-approved and certified for use in safety applications up to and including SIL 3 per IEC 61508.
•
EC Type-approved for use in safety applications up to and including SIL CL3 per IEC 62061.
•
EC Type-approved for use in safety applications up to and including Performance Level PLe (Category 4) per ISO 13849-1. When used without a safety partner
installed, SIL CL2 and PLd (Category 3) are achievable.
Summary of Changes
This manual contains new and updated information as indicated in the following table.
Catalog Numbers 1756-L81ES, 1756-L81ESK, 1756-L82ES, 1756-L82ESK, 1756-L83ES, 1756-L83ESK, 1756-L84ES, 1756-L84ESK,
1756-L8SP, 1756-L8SPK
Topic Page
Connectors and Status Indicators
Connect to an EtherNet/IP Network
Topic
Page
