POINT I/O Protected Sink Output Module
13
Publication
1734-IN585C-EN-E - December 2005
4.
Pull on the I/O module to remove from the base.
5.
Repeat steps 1, 2, 3, and 4 for the module to the right.
6.
Use a small-bladed screwdriver to rotate the orange base
locking screw to a vertical position.
This releases the locking mechanism on the mounting base.
7.
Lift straight up to remove the mounting base.
ATTENTION
When you insert or remove the module while backplane
power is on, an electrical arc can occur. This could cause
an explosion in hazardous location installations.
Be sure that power is removed or the area is
nonhazardous before proceeding. Repeated electrical
arcing causes excessive wear to contacts on both the
module and its mating connector. Worn contacts may
create electrical resistance that can affect module
operation.
