28
Rockwell Automation Publication 1441-UM002A-EN-P - May 2011
Chapter 2
Bump Test Extension Module
Delete Bump Test Files
You can delete a Bump Test measurement or setup from the Dynamix 2500 data
collector.
1.
Select Review Data (saved measurements) or Recall (saved settings) and
press Enter.
2.
On the Bump Test - Review Data screen, select a file.
When the file is listed on
the root of the data
collector, it is saved
internally.
If you want to delete a file
on the storage card either
open the folder and delete
the file or you can use the
ActiveSync software.