6
Setup and Operation
• The reciever should be placed in an area that is stable and least likely to
shake the unit.
• The receiver should be at least 3ˊ off the ground for optimal transmission.
• Connect the antenna, balanced cable AF line, and power supply provided.
• The antenna should extend vertically.
• Switch on the reciever.
• While the receiver is in stand-by, switch on the microphones.
• Adjust volume as necessary.
Tip:
To minimize feedback
avoid operating the
microphones in close
proximity of or in front
of speakers.
For best performance of the wireless microphone system you should make sure
that you run the cable from the receiver output (XLR or 1/4̋ output) into a micro-
phone input on a powered speaker or mixing board. If you run it right into a line
level input then the audio volume level output of the microphone(s) will drop sig-
nificantly. Most mixers and powered speakers have both a Microphone input and
a line level input.
Summary of Contents for RWM80U
Page 1: ...High Performance Wireless Microphone System OWNER S MANUAL RWM80U ...
Page 2: ......
Page 11: ...9 ...
