18
!
WARNING
Setting
1. Scrolling
Use the red bar to scroll through the list of options.
2. Turn On/Off
Toggle options on and off, or start calibration to fine tune the unit to the
vehicle.
3. Customize the Home Screen
In the factory setup section, under applications:
Check or uncheck. This adds and removes applications from the home
screen.
Note: The subwoofer should be set to “on”.
The factory default PIN to access certain settings is set to: 0 - 0 - 0 - 0
1
3
2
DO NOT change “cockpit” settings as it will cause the unit to shut down
indefinitely. For assistance with correcting this
problem visit: www.rockvilleaudio.com
Tip: In the Startup
Logo section, select
your vehicle’s make to
have the logo shown
on the unit at startup.
Tip: In the Startup
Logo section, select
your vehicle’s make to
have the logo shown
on the unit at startup.