3
Precautions
• To minimize the risk of improper installation Rockville recommends that the
installation of this product be performed by an MECP-Certified professional
installer.
• Improper installation may cause damage to the vehicle or injury to the driver
and occupants.
• Installation must be performed in accordance with this product installa-
tion manual. Rockville is not responsible for damage or injuries resulting
from installation not performed strictly in accordance with the proce-
dures described in this manual.
• Proper installation of this product may require the use of mounting
hardware not included.
• Use only new, unused and properly-sized fasteners to install this pro-
duct. Do not use previously installed or worn fasteners.
• No modifications to the product or mounting hardware are permitted.
• This product is designed to be used and viewed by rear seat passen-
gers only. The monitor screen must not be visible to the driver. Viewing
by the driver while operating the vehicle is not recommended.
• Rockville does not recommend connecting wires or cables to auxillary
connectors while the vehicle is in motion.
• This product must not obstruct the driver’s rear view when installed or
used.
• Rockville bears no liability for any property damage or personal injury
that may result from improper or unintended installation or use of this
product.
Resetting the Unit
• Turn the engine key to the “OFF” position
• Unplug the wire harness for five seconds. This will engage a full reset.
• Re-plug the harness.
• Turn the engine key to the “ACC” or “ON” position
• Press and hold the power button for 3 seconds
• The unit will turn on.
• If this procedure does not resolve your issue, please contact customer service
for further assistance.
