BT
When setting up for larger venues, a mixing console becomes a critical piece of equip-
ment for appropriately mixing signals from multiple inputs such as singers, speakers,
effects devices, musicians and of course allows for multiple speaker utilization.
To connect a mixing console begin by.
1. Turning your Power Gig unit to OFF position.
2. Turn Master Volume to 0 position.
3. Turn Mic Volume to 0 position.
4. Connect the LEFT OUTPUT of mixer to the Mic In connection of your Left Power
Gig Unit.
5. Connect the RIGHT OUTPUT of mixer to the Mic In connection of your Right Power
Gig Unit.
6. Switch ON your Power Gig unit.
7. Slowly raise the level of the mixer output to the 0dB level position.
8. Slowly turn the MIC IN BAL volume control clockwise until the CLIP LED indicator
begins to blink, then turn it down slightly. This indicates the maximum input voltage
gain is matched and set properly.
9. Turn Master Volume up to achieve proper volume.
Public Address / Concert Mixer Setup
2
3
OFF
1
POWER
6
4
5
LEFT UNIT
RIGHT UNIT
8
9
7
ON
POWER
