Rockville RPB20, Owner'S Manual, Page: 5 / 8

Bluetooth Pairing
WHEN PAIRING YOUR BLUETOOTH DEVICE PLEASE MAKE
SURE THE VOLUME ON THE DEVICE IS TURNED UP.
Bluetooth Hands-Free
SD Mode
1. Ensure your device is in Bluetooth mode and discoverable.
2. Under list of available devices search for RPB20.
3. Select RPB20.
1. To answer a call press the PLAY button.
2. Press the PLAY button to end a call.
1. Insert Micro SD card (up to 32Gb supported) into the SD slot at the rear of the unit.
2. SD card should be automatically recognized and music will begin to play.
3. Press the
-
/
+
buttons at the top of the unit to navigate through
tracks. Press and hold the
-
/
+
buttons for 5 seconds to raise or lower
the volume.
Aux Mode
Charging
1. Upon plugging in a 3.5mm jack, the unit will automatically switch to that AUX
input regardless of current mode. To switch back to previous mode, use the
MODE button.
2. Press and hold the
- / + buttons for 5 seconds to raise or lower the
volume.
1. To charge the RPB20 plug the included micro USB cable into the port marked DC5V.
2. Charge time is 2.5 hours.
Bluetooth Music
Press the
-
/
+
buttons at the top of the unit to navigate through tracks.
Press and hold the
-
/
+
buttons for 5 seconds to raise or lower the vol-
ume.