Power ON:
Long press the Power button. The unit will automatically enter into Bluetooth pairing
mode.
Bluetooth
Pairing:
Power ON the unit or press the M button to switch to Bluetooth mode. You will hear a tone
and the mode indicator LED will flash blue intermitently. Now look for and select RockWave on your
Bluetooth device’s list of available devices. You will hear a tone if pairing has been successful and
the mode indicator LED will be solid blue. To unpair current device and return to paring mode, press
and hold the Play/Pause button until you hear a tone and the mode indicator LED flashes blue
intermitently.
Music Playback:
Press the Play/Pause button to begin music playback. The mode indicator LED will
slowly flash blue.
Volume Control:
Press the + button to increase the volume or press the - button to decrease the volume.
Skip Songs:
Long press the + button for the next song. Long press the - button for the previous song.
Answering/Ending Calls:
Press the Play/Pause button to answer incoming calls. Long press the
Play/Pause button once to end the conversation or reject an incoming call.
FM Radio
Radio mode:
Press the M button to switch to Radio mode.
Antenna:
Plug the included 3.5mm to 3.5mm cable into the AUX port. This will act as an antenna.
Station Autoscan:
Press the Play/Pause button to start autoscan. Stations will be automatically saved.
Volume Control:
Press the + button to increase the volume or press the - button to decrease the volume.
Stations:
Long press the + button for the next station. Long press the - button for the previous station.
USB/SD
Insert USB flash drive or SD card (up to 32GB) into the corresponding port at the rear of the unit. Unit
will automatically begin playing music (MP3 or WMA format). Press Play/Pause button to pause
music.
Volume Control:
Press the + button to increase the volume or press the - button to decrease the volume.
Skip Songs:
Long press the + button for the next song. Long press the - button for the previous song.
**Please do not remove USB drive or SD card while in use. Doing so may cause damage to your USB
drive or SD card.
Auxillary
Press M button to switch to AUX mode. Use the included 3.5mm to 3.5mm cable to connect your
external audio device.
OPERATION