9
FM RADIO
For FM radio follow the steps listed below.
1. Make sure the power switch is in the ON position.
2. Press the FM button on the remote control or push the INPUT button on the unit until
the digital read out shows numbers.
3. While in FM mode, press the AUTO button to activate automatic station search. Use
the CH+/- buttons to manually search through stations.
To use the system for karaoke connect any microphone via either one of the 1/4
˝
inputs
located on the top of the unit. You can control the MIC volume and echo settings by using
the MIC VOLUME and ECHO knobs on the front of the unit. Use the MIC PRIORITY func-
tion to give priority to microphone during musical playback. This means that the music
volume will drop while either mic is in use.
To connect a guitar or any other instrument/audio device, use the 1/4
˝
input on the top of
the unit labeled GUITAR INPUT. Use the GUITAR VOLUME knob on the front of the unit to
independently control this input's volume.
AUX 1:
Plug a 3.5mm cable into the AUX 1 input on the top of the unit and it will automat-
ically switch to AUX mode. Use this port to connect your laptop, music player or any other
audio playback device with a 3.5mmm output.
AUX 2:
You can use this RCA Line Input when you wish to hook up an additional stereo
signal source: iPhone, iPad, Android phones, TV, CD players, DVD music players, MP3
players etc.
AUX 3:
These inputs are primarily intended for mixers but can be used for other signal
sources such as keyboards, electronic drums, tape recorders, etc.
MIC/GUITAR INPUT
AUX INPUTS
To connect your iPod, iPhone, MP3 player, Android phone or any other Bluetooth capable
device follow the steps listed below.
1. Make sure the power switch is in the ON position.
2. Press the BT button on the remote control or push the INPUT button on the unit until
the digital read out shows “bLU”.
3. Turn on the Bluetooth feature on your device and ensure that it is in “discoverable”
mode. Search for “RockNGo8 V2” on your list of available devices and select it.
4. Upon successful pairing you will hear a tone indicating you may now play music via
your Bluetooth enabled device.
BLUETOOTH
For USB/SD playback follow the steps listed below.
1. Make sure the power switch is in the ON position.
2. Press the USB or SD button on the remote control or push the INPUT button on the
unit until the digital read out shows “USb”.
3. Plug in your SD card or USB flash drive. The unit will automatically read the files and
begin playing music.
USB/SD
