1. Power-on the subwoofer by connecting it to an AC power source. The blue LED pairing
indicator on the back of the unit will begin to flash slowly. Use a small pin to press the
WPS auto pair button. The subwoofer will enter pairing mode and the blue LED
indicator will begin to flash quickly.
2. Power-on the ROCKBAR by connecting it to an AC power source. Press the Power/
Standby button to put the soundbar into pairing mode.
3. Within 30 seconds, the blue LED pairing indicator on the back of the subwoofer will
stop flashing and remain on. This indicates that the subwoofer has successfully paired
with the ROCKBAR.
4. The subwoofer will remember the ROCKBAR and automatically pair with it the next
time it is powered-on.
5. The subwoofer can be paired to other soundbars in the same series, but only one
at a time. To pair to another soundbar, simply repeat steps 1 – 3.
Please note:
If the subwoofer is turned-on, but the ROCKBAR is in stand-by mode or
is disconnected from power, after 5 minutes the blue LED pairing indicator will become
solid red. This indicates that the subwoofer has entered stand-by mode.
To avoid sound quality issues caused by wireless signal interference, please keep the
system an appropriate distance away from other 2.4Ghz wireless devices.
Maximum connection range is 33 feet (10 meters).
1. Power-on the ROCKBAR by connecting it to an AC power source. Press the Power/
Standby button on the side of the ROCKBAR or on the remote control. The LCD display
will read "bt" and the letters will flash steadily.
2. Turn on the Bluetooth feature on your device and ensure that it is in “discoverable”
mode. Search for “Rockville” on your list of available devices and select it.
3. Once paired, the letters "bt" on the LCD display will stop flashing and remain on.
4. All playback functions (play/pause, volume, tracks) can be controlled from your play
back source (ex. phone/mp3 player) without ever having to touch the unit. You can
also control playback from the ROCKBAR (volume) or the remote control (volume,
tracks, play/pause).
Please note:
if you are using an iPhone, iPad, or iPod the
volume controls are synced so that if you raise the volume on your device, it will raise
the volume on the unit and vice versa. If using an Android device, you will need to
adjust the device’s volume and the ROCKBAR’s volume independently.
PAIRING THE SUBWOOFER
OPERATION
BLUETOOTH PAIRING
Many TVs, Digital set-top boxes, game consoles, and DVD players have optical (fiber
optic) outputs. To connect via Optical input, follow the steps listed below.
1. Power-on the ROCKBAR by connecting it to an AC power source. Press the Power/
Standby button on the side of the ROCKBAR and continue to press it until the LCD
display shows the letters "OP". You can also press the INPUT button on the remote
control to reach Optical mode.
2. Ensure that your source is set to Optical output mode Use a digital optical audio cable
to connect the ROCKBAR to the sound source. You will need to adjust the device’s
OPTICAL