Rockville ROCK PARTY 6, Owner'S Manual

Page: 4 / 12

2
1. ¼˝ Unbalanced microphone inputs. Please note: We recommend using professional
unbalanced dynamic mics as they are least likely to be affected by interference. Low
cost, high impedance mics can be used, however the level of background noise is
higher since an unbalanced circuit is far more susceptible to interference.
2. 3.5mm AUX input
3. USB/SD input ports
4. DC 9V power input
5. Charge indicator LED
6. Power button
7. Light: Press the button to turn on the LEDs. Press the button again to cycle through
the 7 LED colors. Press and hold to cycle through the available modes (see page 6).
After selecting your mode, pressing the button again will turn off the LEDs.
8. Play/Pause button: Press the button to pause or resume audio playback in USB/SD
and Bluetooth mode. Press and hold to activate TWS function (see page 3).
9. Mode button: Press to switch between input modes: Bluetooth, USB/SD, and AUX input.
10. Menu button: Press to access bass, treble, and mic volume controls.
11. Master volume
12. Previous/Next buttons: During USB/SD and Bluetooth playback, use these buttons to
move to the previous or next track.
13. LED display (on the front of the unit)
Remote Control
14. Mute
15. Stand-by
16. Playback controls: - press to select previous track, - press to start or pause
Functions
1
7
12
9 10
11
8
2
13
4
3 5 6