•dMitttlttiMi-,,
•
Remove the existing headrest from the seat
•
Adjust the mountings poles of the Rockville headrest unit to fit in the
vehicle's headrest sockets
•
Feed the wiring through the hole, down to the bottom of the seat (make
sure none of the cables are pinched)
•
Once the wires are through, finish inserting the Rockville headrest unit
unit it clicks into place
•
You can now adjust the height of the unit as you would the vehicle's
factory headrest unit
•
Refer to the wiring guide for proper connection of wires
If the mounting poles are too
small for the vehicle's headrest
sockets, use the provided
adapter tubes to en
sure a good fit
