Fuse replacement Diagram
OLD FUSE
SPARE FUSE
UNIT FAILS TO POWER UP.
1. Make sure unit is plugged in properly to wall outlet.
2. Check that power cable is plugged in tightly to unit.
3. If people or equipment tend to step and roll over or stretch your power cable it can
get damaged. Always try a second cable to test for shorts in original cable. Dispose of
original damaged power cables immediately.
4. If system still fails to light, UNPLUG FROM WALL. There is a small door below the
plug input on the Bass Gig unit, pop off this door and remove the fuse with long
nose pliers and replace with same rated fuse. Please make sure unit is unplugged from
wall before attempting to change the fuse!
UNIT TURNS ON, BUT NO SOUND.
1. Check that all cables are plugged in properly.
2. If using a mixing console make sure fader and balance are set to center positions and
level increased.
NOISE, HISS, OR HUM AT OUTPUT.
1. Make sure you are using balanced XLR cables.
2. Check that you are connected to a three prong outlet. If not plug the unit into a thr
prong outlet. If none is available we sugest using a Ground Lift adapter or upgrading
your electrical outlets.
Trouble Shooting
