Rockville RAM12BT V2, Owner'S Manual

Page: 5 / 20

5
POWER
CLIP
1
LINE LEVEL
Setting Level Controls
3
2
Because mixers feature two volume controls (channel and master), when
connecting one via the XLR line in port, the procedure is slightly different. The
RAM-BTv2 Line Level should be set to 50%. Set the mixer master volume to 50%
and make the adjustments in step 3 on the mixer channel level control. If after
making these adjustments the signal still isn’t strong enough, you can additionally
boost the signal by turning up the Line Level control.
When adjusting the Mic Volume control, you must speak into the micophone and
adjust the level control as needed. This is because adjustments to the mic input
are a matter of mic volume in relation to the music volume and not necessarily a
clipping issue.
It is best practice to set your input level controls (gains) in this manner:
1. Unplug all inputs except for the one you wish to set the
gain for. In this instance, the Line In RCA inputs.
2. Set the line level input device volume (smart phone,
tablet, MP3 player, etc.) to 60%.
3. Slowly turn up the level on the selected
input (in this case, the Line Level).
As soon as the clip indicator LED goes on
or you hear any distortion – turn it down
one or two notches.