Rockville Phenom RXA-F1, Owner'S Manual

Page: 9 / 36

9
BP
INPUT OUTPUT
CH1 CH3
CH2 CH4 RIGHT
LEFT
HIGH LEVEL
INPUT
CLONE
X-OVER
FREQUENCY
MULTIPLIER
FULL
50Hz
500Hz
300Hz
3KHz
MIN MAX
HPF X1 X10
CH3 & CH4
+ - GND + -
+ - GND + -
HIGH
PASS
INPUT
LEVEL
LPF / BPF
STATUS
CROSSOVER
INPUT MODE
FULL HPF 2CH 4CH
0dB 12dB 15Hz 1KHz 50Hz 3KHz
BASS
EQUALIZER
HIGH
PASS
LOW
PASS
MIN MAX
INPUT
LEVEL
AUTO START
SMART
CIRCUIT
CHANNELS 1-2 CHANNELS 3-4
CLONE FUNCTION
BAND PASS FUNCTION
The Phenom RXA-F1 and RXA-F2 feature a unique CLONE FUNCTION to assist in setting up a 2-channel bridged system with perfect gain and crossover tracking between
the speakers. Typically when setting up a system you would need to set up channels 1 - 2 and then channels 3 - 4 crossovers and gains separately not guaranteeing perfect
balance or frequency cutoffs. By using the CLONE FUNCTION you can control channels 1 - 2 from the processed signals of channels 3 - 4 thereby guaranteeing that all 4
channels are getting identical voltages and have their crossover settings identical at identical frequencies. Here is how you do it:
The Phenom RXA-F1 and RXA-F2 feature
a BANDPASS FUNCTION. In the LPF/BPF
position the High Pass and Low Pass frequency
controls work together creating a band pass
channel optimized for midrange playback.
BP
INPUT OUTPUT
CH1 CH3
CH2 CH4 RIGHT
LEFT
HIGH LEVEL
INPUT
CLONE
X-OVER
FREQUENCY
MULTIPLIER
FULL
50Hz
500Hz
300Hz
3KHz
MIN MAX
HPF X1 X10
CH3 & CH4
+ - GND + -
+ - GND + -
HIGH
PASS
INPUT
LEVEL
LPF / BPF
STATUS
CROSSOVER
INPUT MODE
FULL HPF 2CH 4CH
0dB 12dB 15Hz 1KHz 50Hz 3KHz
BASS
EQUALIZER
HIGH
PASS
LOW
PASS
MIN MAX
INPUT
LEVEL
AUTO START
SMART
CIRCUIT
CHANNELS 1-2 CHANNELS 3-4
2.
SET THE CROSSOVER MODE
SWITCH TO CLONE CH3 AND CH4.
THIS WILL SEND THE PROCESSED
SIGNAL OF CH3 AND CH4 TO CH1
1.
PLUG STEREO RCA’S
INTO CH3 AND CH4.
3.
NOW ALL CONTROLS FOR CH1
AND CH2 WILL BE NON FUNCTIONAL.
ALL CROSSOVER SETTINGS WILL BE
CONTROLLED FROM CH3 AND CH4.
LOW PASS FREQUENCY RANGE: 50Hz to 3KHz
HIGH PASS FREQUENCY RANGE: 15Hz to 1KHz
CROSSOVER MODE SWITCH
IN LPF/BPF POSITION