Features/Specifications
Installation
Connection Diagram
Remote Control Functions
LED Wiring Instructions
MS10L
MS12L
• Max power: 2400 Watts
• RMS program power: 1200 Watts
• RMS power: 600 Watts
• Polypropylene cone with rubber edge
• 2.0˝ 4 Layer dual voice coil
• Molded ABS plastic basket made with a special
blend that is water proof and unbreakable
• Cool LED lighting effects with remote control
• Magnet 80oz double stacked magnet
• Frequency response: 30Hz – 4Khz
• Impedance: Dual 4 ohms
• Sensitivity: 90dB
• Total diameter: 10.6˝
• Cutout diameter: 11.4˝
• Total height: 7.2˝
• Mounting depth: 5.6˝
• Max power: 2800 Watts
• RMS program power: 1400 Watts
• RMS power: 700 Watts
• Polypropylene cone with rubber edge
• 2.0˝ 4 Layer dual voice coil
• Molded ABS plastic basket made with a special
blend that is water proof and unbreakable
• Cool LED lighting effects with remote control
• Magnet 80oz double stacked magnet
• Frequency response: 20Hz – 4Khz
• Impedance: Dual 4 ohms
• Sensitivity: 90dB
• Total diameter: 12.8˝
• Cutout diameter: 11˝
• Total height: 7.7˝
• Mounting depth: 6.1˝
The Rockville MS-L series marine subwoofer is one of the most powerful on the market. What really
makes this sub stand out is the sound quality and durability. The frequency range of these subs is so
good that it will make all your songs sound so much better! These play frequencies that normal full
range speakers cannot hit adding depth and richness to all your music. We added an awesome LED
lighting system to these subs to really make your system shine. Our LED subs feature 19 dynamic
modes, 20 switchable static colors, strobe effect, speed, and brightness settings. They are all adjust-
ed through the remote. There is also demo mode that will run through 9 dynamic programs and
repeat. The MS-L series subwoofer was designed in a molded ABS plastic basket made with a
special blend that is waterproof and un-breakable. You can literally jump on it and hit it with a sledge-
hammer without it breaking!
Using only true marine grade components and materials, the Rockville MS10LW subwoofers are fully
marinized against salt & fresh water conditions. These subs are completely waterproof and protected
from the elements! They are UV treated and have a special waterproof coating to prevent water
damage.
Please read this guide carefully for proper use of your Rockville MS-L series marine subwoofer.
Should you need technical assistance please call our technical help line at 1-646-758-0144, Monday
through Friday, 9am to 5pm EST.
1. Find a mounting location that does not interfere with the safe operation of your vessel. Make sure
mounting screws will not puncture wiring harnesses, control cables, hydraulic lines, fuel lines, the fuel
tank or the hull. These may be located behind or under the mounting surface.
2. Create a mounting template using the provided measurements and place it on the desired surface.
Using a jigsaw or rotary cutting tool, cut along the line denoting the mounting hole. Use a drill to drill
the holes for the mounting screws.
3. Remove the grill. Connect your pre-routed speaker cables to the woofer. Insert the woofer into the
mounting hole, align the mounting screw holes, insert the screws and tighten them. Be sure to not
over tighten. To replace the grill, press and turn clockwise (to the right).
1. Power/Standby:
Press this key to turn on LEDs or switch to
standby mode.
2. Dynamic Mode:
Switch from dynamic mode to color mode
or switch between dynamic modes.
3. Dynamic Mode Speed:
Use these buttons to adjust dynam-
ic mode speed. If the unit is in static mode, pressing these
buttons will switch unit to dynamic mode.
4. Static Color Adjust:
Use this button to switch between
static colors. Pressing these keys while in dynamic mode will
switch the unit to static mode.
5. Brightness Adjust:
Pressing these buttons will adjust bright-
ness while in static mode. If the unit is in dynamic mode,
pressing these buttons will switch the unit to static mode.
6. Demo Mode:
This button will place the unit in demo mode.
While in demo mode, unit will loop through 9 of the dynamic
modes with each repeating 3 times.
1.
Connect the red cable of the included LED power harness to the positive (+12V) terminal of your
power supply. Connect the black cable to the negative terminal of your power supply.
2.
Connect the male end of the harness to the corresponding female end protruding from the back
speaker near the terminals.
One 4 ohm DVC woofer with a 2 ohm load
4Ω
4Ω
2Ω
ATTENTION:
BRIDGED
WIRE
One 4 ohm DVC woofer with an 8 ohm load
4Ω
4Ω
8Ω
Two 4 ohm DVC woofers with a 1 ohm load
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
1Ω
Two 4 ohm DVC woofers with a 4 ohm load
4Ω
MODE
DEMO
SPEED
+
MODE
–
–
SPEED
–
BRIGHT
+
BRIGHT
–
COLOR
+
COLOR
–
1
3
4
3
10
2
2
5
CAUTION!
DO NOT SHORT CIRCUIT THE LED OUTPUT, THIS MAY LEAD TO PERMANENT DAMAGE!