7
Make sure you have all the necessary screws and brackets. There
should be five brackets and one bag of screws. If any of these items
are missing, please contact Rockville.
Before you begin, please make sure you have the proper tools and necessary accesso-
ries. For this installation, you will need the following items:
• mounting brackets and screws (included)
• wall hooks (optional, not included)
• speaker cable (included)
• drill
• Phillips screwdriver
Using two screws, secure one bracket to the back of each speaker
you wish to mount.
Now mark on the wall the place where you will be mounting your
speakers. Use the diagram from the
POSITIONING THE SPEAKERS
section to determine the best location. Both front speakers should be
at the same height; the same goes for the satellite units. Remember to
keep speakers at least two feet away from corners, and make sure you
have enough wire to reach the mounting location.
You can use a screw or a mounting hook to hang the speaker. Use a
screw with a drywall insert or drive it into a wall stud to ensure that it
is securely fastened to the wall. Use a stud finder to locate the stud
and to make sure that there are no wires or cable lines located in that
area. Once the mounting hooks or screws are in place, you are ready
to begin mounting. Be sure to wire each speaker before mounting it to
the wall.
OPTIONAL WALL MOUNTING INSTRUCTIONS
