6
Operation
To connect your iPod, iPad, iPhone, MP3 player, Android phone or tablet, or any other
Bluetooth-capable device, follow the steps listed below.
1. Make sure the speaker is ON.
2. Press the MODE button on the unit or the BT button on the remote control until you
hear a two-tone sound indicating that Bluetooth mode is enabled.
3. Turn on the Bluetooth feature on your device and ensure that it is discoverable. Look
for and select “HOUSE PARTY SYSTEM 10” from the list of available devices.
4. Use the PLAY/AUTO button on the unit or the button on the remote control to
pause and resume playback.
5. Use the PREV/CH- and NEXT/CH+ buttons on the unit or the / on the remote
control for track selection.
6. Use the master /- buttons on the unit or the VOL +/- buttons on the remote
control to set the volume level.
Please note: Use devices equipped with Bluetooth 5.0 to achieve maximum range. The
unit will remember the last paired device.
Bluetooth
FM Radio
To use the FM radio function, follow the steps below.
1. Connect and fully extend the included antenna.
2. Press the MODE button on the unit or the FM button on the remote control to place the
unit in FM radio mode.
3. Press the PLAY/AUTO button on the unit or the AUTO button on the remote control to
innitiate the auto-scan function. The speaker will automatically scan for and save all
available stations.
4. Use the PREV/CH- and NEXT/CH+ buttons on the unit or CH-/CH+ keys on the
remote control to toggle through the saved stations.
5. To manually tune a specific station, use the number keys on the remote control. To
save a manually tuned station, press the SAVE button on the remote. Then use the
CH+/- keys to select the slot to which it will be saved and press the SAVE button. If the
operation is successful, you will see the word “GOOD” on the display.
USB/SD
The built-in media player allows you to play MP3 files. To access this function, follow the
steps below.
1. Make sure the speaker is ON.
2. Insert a USB flash drive or SD card into the corresponding port. Music should begin
playing automatically.
3. Use the PLAY/AUTO button on the unit or the button on the remote control to
pause and resume playback.
4. Use the PREV/CH- and NEXT/CH+ buttons on the unit or the / on the remote
control for track selection.
5. Use the master /- buttons on the unit or the VOL +/- buttons on the remote
control to set the volume level.
Please note: The unit can accept SD cards and USB drives with a max capacity of 32GB.
Accepted formats are MP3, WMA, and WAV. Operation may be slower when searching
large files or a USB drive or SD card that is filled to capacity.