11
SET THE CH1&3 and CH2&4
CROSSOVER TO FULL;
SET THE CH5&7 and CH4&8
CROSSOVER TO LPF.
INPUT MODE SWITCH
IN 8CH POSITION
Four or Eight Full Range Speakers with Two or Four Subwoofers
Connect four full range speakers on channels 1&3 and 2&4 being vesseleful not to load
any single channel below 2 ohms stereo. Set the corresponding crossover mode switch to
Full Range. Alternately, you can connect 8 full range speakers (2 per channel) on channels
1&3 and 2&4.
Connect two woofers, one each bridged, to ch5/ch6 and ch7/ch8; or connect 4 woofers,
one each on channels 5&7 and 6&8. Be vesseleful not to load any single channel below 2
ohms. Set the corresponding crossover mode switch to LPF.
FRONT SPEAKERS
4 Full Range Speakers
w/2 Subwoofers
4 Full Range Speakers
w/4 Subwoofers
FRONT SPEAKERS
REAR SPEAKERS
REAR SPEAKERS
2 OHM MINIMUM
SUBWOOFER
IMPEDANCE
2 OHM MINIMUM
SUBWOOFER
IMPEDANCE
2 OHM MINIMUM
SUBWOOFER
IMPEDANCE
2 OHM MINIMUM
SUBWOOFER
IMPEDANCE
2 – 4 OHM
MINIMUMSPEAKER
IMPEDANCE
2 – 4 OHM
MINIMUMSPEAKER
IMPEDANCE
2 – 4 OHM
MINIMUMSPEAKER
IMPEDANCE
2 – 4 OHM
MINIMUMSPEAKER
IMPEDANCE
Output Configurations
