Ultra-Fidelity Outdoor Speakers
INSTALL INSTRUCTIONS
In-Ground Subwoofer Series
SubSub™
Residential Contact: MSE Audio, 855.663.5600 / 913.663.5600 / [email protected]
Commercial Contact: SoundTube Entertainment, 800.647.TUBE / 435.647.9555 / [email protected]
INSTALL INSTRUCTIONS
In-Ground Subwoofer Series
SubSub™
1.
Unpack subwoofer and rock
cover from the box. Warning:
Subwoofers may be heavy, please
use caution when lifting or
handling.
Notice:
packing peanuts are
bio-degradeable and can be used
in compost.
2.
Locate speaker wire on the end
of the main subwoofer chamber.
Strip wire ends if necessary.
3.
Dig a hole large enough to
accommodate the subwoofer
chamber. IMPORTANT: the port
(pipe) section should extend
about 4” (10.16 mm) above
ground level – it should not be
buried or set at ground level.
Place the subwoofer in the hole
with the port section upright and
level.
4.
Connect the speaker wire to
the input signal wire. Red is
positive, black is negative. Use
included wire nuts to secure the
connection. Step 2 is required to
secure the negative connection,
and then the positive connection.
1.
2.
5. Fill in the hole, taking care to
ensure that no dirt or other
materials enter the subwoofer
port.
Subwoofer Installation:
SubSub
6. Place the rock cover over
the port.
Done.
