Rockustics Planter Speakers 298SOP65GG Install Instructions Manual Download Page 4

Patented Rockustics Technologies

Rockustics and MSE Audio constantly 

develops new technologies that enhance 
audio product performance. Rockustics 
innovations are protected by multiple U.S. 
and international patents. MSE Audio 
actively defends its patents in order to pro-
tect Rockustics resellers and end users.

Technical Data and 
Specification Tools

Technical Data

Rockustics strives to provide complete

and effective technical information and 
data to dealers, engineers and designers. 
All data are available from Rockustics or at 
www.rockustics.com.

Technical data and downloads 

include:

EASE™ data - 3-D polar plots

EASE™ Address - 2-D modeling for dis-
tributed systems

Autodesk® Revit® software

Tech sheets - Technical information and 
architectural specs for system engineers

Data Acquisition and Verification

All performance data acquired within

MSE Audio are analyzed using a variety of 
standard measurement techniques, includ-
ing Measured Length Sequence (MLS) and 
Time Delay Spectrometry (TDS). Perfor-
mance, development, and data acquisition 
tools include: Gold Line TEF 20, CLIO, 
LMS, LEAP, and proprietary model-
ing software. EASE™ data are acquired 
through an automated CLIO/Outline/ 
EASE™ interface.

Architectural Specifications

The loudspeaker shall be a coaxial 

planter design consisting of one 165.1 mm 
(6.5 in.) low-frequency transducer and 
one 19 mm (0.75 in.) tweeter. The low-
frequency voice coil diameter shall be 25 
mm (1 in.). 

Performance 

 of a typical 

production unit shall be as follows: Usable 
frequency response shall extend from 

76 Hz - 19.5 kHz. Measured sensitivity 
(2.83 Volt input, 1 meter) shall be at least 92 
dB. The loudspeaker shall have a nominal 
impedance of 4 Ohms.

The enclosure shall be constructed of a 

rotation-molded, UV-stable polyethylene. 
Color options shall be gray granite or terra 
cotta granite. All transducers and network 
circuitry are weather-resistant and ship in 
a sealed enclosure.

The external wiring input connector 

shall be hardwire leads. The overall planter 
dimensions shall be no more than 508 mm 
(20 in.) in diameter by 431.8 mm (17 in.) in 
height. The unit shall weigh no more than 
6.35 kg (14 lbs.).

The system shall be the OmniPlanter 

6.5 for both low and high impedance ap-
plications.

Rockustics

8650 College Boulevard
Overland Park, KS 66210
Phone 

913.663.9770

Fax 

913.663.9790

www.rockustics.com

All Rockustics products come with a 
10-year limited warranty.

OmniPlanter 6.5

Outdoor/On-Ground Speaker

Preliminary Technical Information for System Engineers

Garden Series

Technical data and product downloads available at 

www.rockustics.com

MSE Audio

10661 Rene St.
Lenexa, KS 66215
Phone 855.663.5600
Email [email protected]

www.rockustics.mseaudio.com

Summary of Contents for Planter Speakers 298SOP65GG







Reviews: