2) (
Photo D
) Screw the urn to the housing, pull the
new wire whip through the hole in the base.
Photo E
) Pull the wire tight and screw the base
back into the housing. Done.
Page 1: ...H A N D C RAFTED IN AM E R I C A H A N D C R A F T E D I N A M E R I C A Rev 7 09 2019 PLANTER DRIVER INSTALL INSTRUCTIONS ...
Page 2: ...ckustics MSE Audio technical support team Contact information can be found on the back of the manual Remove the Base 1 Photo A To remove the base use a long phillips head bit to remove the screws inside the legs that hold the base to the Planter Remove the Housing 1 Photo B Next remove the screws next to the face of the driver Replace the Housing 1 Photo C Remove the old housing from the Planter a...
Page 3: ...2 Photo D Screw the urn to the housing pull the new wire whip through the hole in the base 2 Photo E Pull the wire tight and screw the base back into the housing Done Photo D Photo E ...
Page 4: ...KS 66215 913 663 5600 or 855 663 5600 www Rockustics com Applicable Models OmniPlanter 6 5 OmniPlanter 6 5 Transformer OmniPlanter 8 0 OmniPlanter 8 0 Transformer SquareRoot 6 5 SquareRoot 6 5 Transformer SquareRoot 8 0 SquareRoot 8 0 Transformer ...
