2
NOTE: IT IS VERY IMPORTANT THAT YOU READ THIS SECTION TO PROVIDE
YEARS OF TROUBLE FREE USE. THIS UNIT REQUIRES CAREFUL HANDLING.
1.
Read all instructions contained in this manual
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean with dry cloth.
7.
Do not block any ventillation openings.
Install in accordance with the manufacturers instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.
9.
This product may be equipped with either a polarized alternating-current line
plug (which is a plug that has one blade wider than the other) or a plug with
two blades with a third grounding prong. The wide blade or the third prong
are provided as a safety feature. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched - particularly at the
plugs, convenience receptacles, and that the point where they exit from the
apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Do not use this product with any case, stand, tripod, bracket or table that is
not specified by the manufacturer. Where it is specified by the manufacturer
insure that the case, stand, tripod, bracket, etc. is properly adjusted and
setup. Extra care and caution should be taken to avoid tip over and injury.
13.
Unplug this apparatus during lightning storms or when unused for a long
period of time.
14.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus or if the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15.
To be in full CE and CSA compliance it is recommended to operate the
apparatus at least 6 inches (or 16 centimeters) away from any wall or object.
DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT. THIS EQUIPMENT
SHOULD BE SERVICED BY QUALIFIED PERSONNEL ONLY. DO NOT MAKE ANY
INTERNAL ADJUSTMENTS OR ADDITIONS TO THIS EQUIPMENT AT ANY TIME
OR TAMPER WITH INTERNAL ELECTRONIC COMPONENTS AT ANY TIME. FAILURE
TO FOLLOW THESE INSTRUCTIONS MAY VOID THE WARRANTY OF THIS EQUIP-
MENT, AS WELL AS CAUSING SHOCK HAZARD.
OPERATING
TEMPERATURE
Do not expose this unit to excessive heat. This unit is designed to operate be-
tween 32° F and 104° F (0° C and 40° C). This unit may not function properly under
extreme temperatures.
Precautions - Please read!!
