7
Fuse Replacement
Always replace the main fuse with an identically rated replacement. Your
Velocity
®
120 amplifier uses a 5x20mm, 4 amp, 250V slow-blow fuse. The fuse is
located immediately below the line cord inlet on the rear panel and can be accessed
by removing the fuse cover module as shown below.
Note: A small compartment is
also provided within the fuse
cover module for storing a
spare fuse.
Use a small flat screwdriver as shown to slide the fuse cover out from the power inlet module.
The fuse can be found inside the fuse cover module after it is pulled out.
After replacing the fuse with another of identical specifications, push the fuse cover module fully
back into place, ensuring that the fuse has snapped onto the fuse holder inside the power inlet
module.
G
