BOOST Switch:
This switch BOOSTS works in conjunction with the “+” switch. To
Turn on the “Boost” function flip the switch to “ON”.
“+” Switch:
The Boost works in conjunction with the “+” switch. When the Boost
switch is On and the “+” switch is in the down position you will obtain
an extra gain stage. When the “+” switch is Up, you obtain an ad-
ditional gain stage and essentially add an entire tube to the front end,
replicating the “hot-rodded” California style amps.
BASS control:
This control is used to determine the amount of low frequency or
Bass present in the signal.
MIDDLE control:
This control is used to determine the amount of mid frequency pres-
ent in the signal.
TREBLE control:
This control is used to determine the amount of high frequency or
Treble present in the signal
AFTERBURNER Switch
:
This switch works in conjunction with the DRIVE control. After
the EQ section is another gain stage. When the AFTERBURNER
is turned “ON” this switch emulates a post phase inverter master.
When on use the DRIVE control to adjust amount of DRIVE present
in the AFTERBURNER stage.
6
7
8
9
10
11
Front Panel....continued:
