Rocktron INTELLIFEX XL User Manual Download | Manualshive

Page: 44 / 58

background image

41

9. MIDI Operation

A. MIDI Controller Assignments

Controller mapping allows for specific Intellifex adjustable parameters to be mapped (or assigned) to a MIDI controller

number for real-time control (via a pitch wheel, expression pedal, etc.) in live performance situations. Any parameter may be
assigned to any controller number, from controller 0 through controller 120, or OFF. In the OFF position, the assigned
parameter will not respond to any MIDI control change. Each preset allows for up to 8 controllers.

The Controller Assign function is accessible in user presets 1-80. Factory presets 81-160 do not include this function.

Turn the PARAMETER SELECT control to access the first parameter of the Controller
Assign function. This parameter allows for the selection of a controller number which the
first parameter (selected in Step 5) will respond to.

Step 1

To access the Controller Assign function, turn the FUNCTION SELECT control one step
clockwise past "Title Edit".

CONTROLLER ASSIG

Step 2

NUMB1

XXX

Use the PARAMETER ADJUST control to select the controller number to be assigned to
the first parameter (PARA1). You may choose any number from 0 to 120, or OFF so that
the parameter will not respond to MIDI controller changes. Match this number with the
MIDI transmitter controller number.

Step 3

After selecting the desired controller number, press the STORE button to save the number.
"STORED" will flash briefly on the display.

Step 4

NUMB1

7

STORED

3,6,9,12

4,7,10,13

1

2,5,8,11

«
...
42
43
44
45
46
...
»

Summary of Contents for INTELLIFEX XL



























































Reviews:

No comments

Related manuals for INTELLIFEX XL

Brand: Rohnson Pages: 9

Performance AV1

Brand: JBL Pages: 63

SaladXpress 70950-CN

Brand: Hamilton Beach Pages: 18

Big Mouth 70590

Brand: Hamilton Beach Pages: 36

Brand: Hamilton Beach Pages: 44

Brand: Miranda Pages: 47

COMPANION HF800A13

Brand: Moulinex Pages: 9

Brand: Hamilton Beach Professional Pages: 48

Essentials KFP400

Brand: Kambrook Pages: 24

Brand: Harbor Freight Tools Pages: 2

Brand: Metos Pages: 28

Brand: Pendulum Pages: 7

Brand: SEVERIN Pages: 64

Brand: Westmark Pages: 12

Brand: Usl Pages: 53

Brand: Sunbeam Pages: 15

MultiChopper FC7500

Brand: Sunbeam Pages: 24

Brand: Saturn Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands