background image

PRECAUTIONS

NOTE: IT IS VERY IMPORTANT THAT YOU READ THIS SECTION TO PROVIDE 

YEARS OF TROUBLE FREE USE. THIS UNIT REQUIRES CAREFUL HANDLING. 

•  All warnings on this equipment and in the operating instructions should 

be adhered to and all operating instructions should be followed.

•  Do not use this equipment near water. Care should be taken so that objects 

do not fall and liquids are not spilled into the unit through any openings. 

•  The power cord/adapter should be unplugged from the outlet when left 

unused for a long period of time.

•  Do not block any ventilation openings (if applicable).  Install in 

accordance with the manufacturer’s instructions.

•  Do not install near any heat sources such as radiators, heat registers, 

stoves or other apparatus (including amplifiers) that produce heat.  

•  Only use attachments/accessories specified by the manufacturer.

•  Do not use this product with any case, stand, tripod, bracket or table that 

is not specified by the manufacturer.  Insure that the case, stand, tripod, 

bracket etc. is properly adjusted and setup (follow all instructions).  Extra 

care and caution should be taken to avoid tip over and injury.

•  Unplug this apparatus during lightning storms or when unused during 

long periods of time.

Refer all service to qualified service personnel.  Servicing is required when the apparatus has been 

damaged in any way, such as power supply or plug is damaged, liquid has been spilled or objects have 

fallen into the apparatus or if the apparatus has been exposed to rain or moisture, does not operate 

normally or has been dropped.

DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT.  THIS EQUIPMENT SHOULD 

BE SERVICED BY QUALIFIED PERSONNEL ONLY.  DO NOT MAKE ANY 

INTERNAL ADJUSTMENTS OR ADDITIONS TO THIS EQUIPMENT AT ANY 

TIME.  DO NOT TAMPER WITH INTERNAL ELECTRONIC COMPONENTS AT 

ANY TIME. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY VOID THE 

WARRANTY OF THIS EQUIPMENT, AS WELL AS CAUSING SHOCK HAZARD. 

OPERATING TEMPERATURE

Do not expose this unit to excessive heat.  This unit is designed to operate between 32° 

F and 104° F (0° C and 40° C).  This unit may not function properly under extreme 

temperatures.

Summary of Contents for Bass 200













Reviews: