AddING fLUId IN vehICLeS wITh ABS
1.
Follow all steps as above with the following exceptions.
2.
Loosen the drain screw on only one clamp at a time and deflate it.
3.
After changing the fluid, turn off the engine.
4.
Discard the used fluid bottles.
5.
Repeat the same for the other cylinders.
AfTeR BLeedING ANd ChANGING The fLUId
1.
Replace the original reservoir lid.
2.
Disconnect the air hose from the quick-connect fitting (8) on the reservoir.
3.
Open the air release valve (9) on the reservoir and pull the safety valve (12) to release
pressure from the reservoir.
4.
Pour the contents of the bottles into the used brake fluid container for disposal.
Attention:
before driving the car, press the brake pedal repeatedly until it drops significantly.
Check tightness at the terminals. Then test the brakes at low speed before driving normally.
MAINTeNANCe
Note:
Before performing maintenance on the equipment, make sure it is not under pressure.
1.
Wipe up any spilled brake fluid.
2.
Wipe the device with a soft cloth.
3.
Store in a dry and clean place.
AdAPTOR LIST: