Page | 11
Tone
Tone Selection:
When the keyboard is switched on t
he default TONE is ‘’
t
00’’
Grand Piano. To change the tone, press the
[TONE] button first and then directly input the number code on the keypad by pressing the corresponding
digits 0-9. The tones can also be changed by using the + / - buttons. Refer to Appendix III for a list of the
available tones.
Effect & Control
Split Keyboard:
To switch on Split Keyboard mode press the [SPLIT] button, the LED will show [SPL]. The keyboard will
split into two keyboards at the 24th key from the left. You can adjust the TONE of the right hand side of
the keyboard by pressing the corresponding digits 0-9 on the numerical keypad. The TONE of the left
hand side of the keyboard will remain set to the tone chosen before the Split Keyboard mode was entered.
In Split Keyboard mode the pitch of the left hand keys are raised by one octave and the right hand keys
lowered by one octave. Press the [SPLIT] button again to exit Split Keyboard mode.
