5
SAFETY WARNINGS
BEFORE LIGHTING...
Inspect the gas supply hose prior to turning the gas “ON.” If it is evident there is excessive
abrasion or wear, or the hose is cut, it must be replaced prior to the grill being put into oper-
ation. The replacement pressure regulator and hose assembly shall be that specified by the
manufacturer. Do not use the grill if the odor of gas is present. Only the pressure regulator
and hose assembly supplied with the unit should be used. Never substitute regulators for
those supplied with the grill. If the replacement is necessary, contact the customer service
number below for proper replacement.
Attach the regulator to the cylinder and check the hose and regulator connections using a
soap and water solution before operating the grill.
RECOGNIZED SAFETY SYMBOLS, WORDS, AND LABELS
WARNING: Always keep your face and body away from the burner when lighting
WARNING: IMPORTANT!
Keep a spray bottle of soap water near the
gas supply valve and check the connections
before each use. See leak testing section.
Do not attempt to light the grill if odor of gas
present
