SECTION 1—IN GENERAL
Adjustable Stroke Detect-A-Finger
®
Drop-Probe Device
Rockford Systems, LLC
6
Call: 1-800-922-7533
Part No. KSC-000 Operator
Safety Precations Sign
Front Side
Part No. KSC-055 Danger Sign
(Foot) - Standard
Part No. KSC-055S - Spanish
Part No. KSC-055F - French
Danger Sign(s) to be Mounted on Machine
If any danger sign becomes destroyed or unreadable, the sign
must
be replaced immediately. Contact factory for replacement danger sign(s).
OPERATOR
SAFETY PRECAUTIONS
Handout for Anyone Operating This Machine
Before You Operate This Machine
You Must Read and Understand
These Safety Precautions
See Reverse Side for Other Safety Precautions.
OVER
Place Your Hands
or Any Part of
Your Body in This
Machine
Sign No. KSC-000
DANGER
OPERATOR
SAFETY PRECAUTIONS
Handout for Anyone Operating This Machine
Before You Operate This Machine
You Must Read and Understand
These Safety Precautions
See Reverse Side for Other Safety Precautions.
OVER
Place Your Hands
or Any Part of
Your Body in This
Machine
SIGN NO. KSC-000
SUGGESTED PROCEDURE FOR
MOUNTING THIS SIGN
NEVER OPERATE MACHINE WITHOUT THIS
DANGER SIGN VISIBLE TO ALL PERSONNEL.
THE PURPOSE OF THIS SIGN IS TO
ADEQUATELY WARN ALL PERSONNEL OF THE DANGER
OF BODILY INJURY OR DEATH.
To accomplish this purpose - ALWAYS mount this
sign in the following manner:
(1) Clearly visible to the operator
and other personnel
(2) At or near eye level
(3) PERMANENTLY fastened with
bolts or rivets
Reverse Side
Never operate this machine unless danger signs are in place.
Accompanying this equipment is a 5” x 6” polyethylene danger sign, Part No. KSC-055. This sign MUST BE PERMANENTLY
MOUNTED IN A PROMINENT LOCATION on the machine where this equipment is installed. This sign must be in a LOCATION
THAT IS EASILY VISIBLE to the operator, setup person, or other personnel who work on or around this machine. ALWAYS
mount this sign with bolts or rivets when installing the enclosed equipment.
“Mechanical Power Press Safety” Booklet
A copy of Booklet No. MPPS (Mechanical Power Press Safety) is available upon request. This booklet is copied verbatim from the CFR (Code of
Federal Regulations) and contains all relevant sections of the OSHA standards concerning power presses with which an employer (user) must
comply. The enclosed equipment must be installed, used and maintained to meet these standards. Specifically, any time a foot switch is used, a
suitable
point-of-operation safeguard or device must be used
to prevent bodily injury. In addition,
every press must be provided with a
point-of-operation safeguard!
Please review this booklet before installing the enclosed equipment. If you are unfamiliar with these detailed safety
regulations, which include regulations on safeguarding the point of operation properly, you may want to attend our regularly scheduled machine
safeguarding seminars. To obtain detailed information about these training seminars, please call, fax, write, or check our Web site. Our telephone,
fax number, Web site, and mailing address are on the front cover of this manual.
