8
Once all connections are made at the amplifier, begin to route the harness
down the passenger side of the vehicle following the main vehicle harness.
Tuck the audio harness under main vehicle harness to avoid the panel
bulging.
Secure the main audio harness the shifter support with the supplied zip
ties.
Pass the wire harness through the transmission tunnel leaving the harness
under hood.
Plug the RCA’s from the main harness into the back of the PMX-2 and slide
radio into the center console. Secure dash kit to the center pocket once
everything is connected.
Connect the remote turn on wire to the PMX-2 harness under the hood,
along with any other speaker connections.
Connect the power and ground wires to the battery.
NOTE: Be sure to test the system before reassembling the vehicle.
Installation
Summary of Contents for Yamaha YXZ RFYXZ-K8
Page 10: ...https appliancetechmanuals com...
Page 11: ...https appliancetechmanuals com...
