5
Contents
Installation Tools
The following is a list of suggested tools needed for installation:
Installation Considerations
This section focuses on some considerations for installing your Harley-
Davidson® saddlebag lid speaker kit.
If you feel unsure about installing this system yourself, have it installed
by a qualified technician.
When drilling holes, make sure what is on the other side. Be sure that
any electrical, fuel lines or any other important components are free
and clear from the area.
Before installation, disconnect the battery
negative (-) terminal to prevent damage to
the unit, fire and/or possible injury.
Before beginning any installation, follow
these simple rules:
Be sure to carefully read and understand
the instructions before attempting to install
these speaker kits.
• Consult your motorcycles’s service manual for model specific
information. Models may differ from year to year depending on
factory options and aftermarket accessories added.
• This speaker kit is specifically designed to work with Rockford
Fosgate’s Punch® and Power series compact amplifiers.
• With the addition of an amplifier or source unit, be sure that your
current charging system is in proper working order.
• Visit
rockfordfosgate.com
for more comprehensive product
information.
• Visit our
YouTube
channel for comprehensive installation videos
demonstrating complete installation guides and install tips.
Installation
Applicable Models:
2014+ Harley-Davidson® Motorcycles with Factory Saddlebags
This saddlebag lid speaker kit is designed to work with Rockford
Fosgate’s compact chassis Punch® and Power series amplifiers.
Step 1. Remove the saddlebag lids, seat, gas tank and fairing cover
from the motorcycle.
Step 2. Using masking tape, tape over the painted portion of your
saddlebag lids.
NOTE: This will prevent any scratching of the factory paint during the
installation process.
NOTE: Be sure the template sits snug on all sides and corners of the
saddlebag lid before securing.
Step 3. Apply the template to the saddlebag lid and secure using (2)
screws that came with the kit.
NOTE: There is a brake and clutch side specific template for each lid. You
can use an 1/8" drill bit to predrill holes before screwing the template to
the lid. Be sure the template is secured and wont move.
Step 4. Once the template is secured, use a 5/16" drill bit and drill
holes in the template.
NOTE: We suggest drilling at every segment to make sawing easier.
Step 5. Using a jigsaw, follow along the template.
NOTE: DO NOT cut the segments of the template until all of the slots
have been cut. This will help maintain accuracy and fitment for the
grilles.
NOTE: When cutting, be sure that the saw blade stays in between the
edges of the template. Cutting into the template will lead to fitment
issues.
• Drill
• Jigsaw / Airsaw
• 1/8" Drill Bit
• 5/16" Drill Bit
• 3/4" Hole Saw
• Wire Cutters
• Small Flat Blade Screwdriver
• Phillips Screwdriver
• Torx Drivers
• Socket set
• Masking Tape
• (2) TMS69 Speakers
• (2) Speaker Grilles
• (2) Mounting Rings
• (2) Cutting Templates
• (16) Mounting Screws
• (1) Main Harness
• (2) Saddlebag Harnesses
• Plastic Wire Tie Wraps
• Plastic Cable Tie Mounts
Screw Locations
Apply Tape
Summary of Contents for TMS69BL14
Page 7: ...7 ...