Adjusting the Highpass
Crossover
The following instructions explain how to adjust the Highpass
crossover outputs.
1 .
From the first page of the XOVER Menu, select HP. The first
OUTPUT SELECTION screen is displayed. This menu en-
ables you to select the speakers on the left, right, or both left
and right sides of the vehicle.
XOM/ HP
L E F T R I G H T B O T H
Notice the message in the upper left-hand corner of the
screen. This indicates that you have selected the Highpass
crossover output.
2. Press the function key underneath the desired selection.
The second OUTPUT SELECTION screen is displayed.
This menu enables you to select the speakers in the front,
back, or both front and back areas of the vehicle. Notice
how the message in the upper left-hand corner is changed
to include L=R. This indicates that BOTH the left and right
sides of the vehicle were chosen in the previous screen. An
“R” in this position indicates that the Right side was se-
lected; an “L,” indicates the Left side.
-6-
